Vqfx202r110reqemuqcow2 Work Info

show chassis fpc show version If PFE shows Online , your image works. If Offline or Testing — the qcow2 lacks proper kernel modules for your hypervisor’s virtual NIC. 1. Kernel Panic on Boot Cause : CPU model mismatch (e.g., qemu64 instead of host-passthrough ). Fix : Edit VM XML to use <cpu mode='host-passthrough'/> . 2. PFE Won’t Come Online Cause : Missing VFIO or hugepages. Fix : Enable 1G hugepages:

virsh start vqfx20-re virsh console vqfx20-re You should see Juniper bootloader (GRUB) output. If the system hangs at “Loading initrd…” — the image is either corrupted or the VM lacks sufficient RAM/CPU. Once booted, log in as root (no password by default on unconfigured vQFX). Set management IP via vg1 interface: vqfx202r110reqemuqcow2 work

cli configure set interfaces vme unit 0 family inet address 192.168.1.10/24 set routing-options static route 0.0.0.0/0 next-hop 192.168.1.1 commit The vQFX splits control (RE) and forwarding (PFE). Check: show chassis fpc show version If PFE shows

qemu-img convert -f qcow2 -O vmdk vqfx202r110reqemuqcow2.vmdk Use virt-install or virt-manager . But manual XML editing yields best results. Below is a validated XML snippet: Kernel Panic on Boot Cause : CPU model mismatch (e

echo 1024 > /proc/sys/vm/nr_hugepages And add to VM XML: