CalibratedPoint->X = (RawPoint->X * pContext->CoeffA) + (RawPoint->Y * pContext->CoeffB) + pContext->CoeffC; CalibratedPoint->Y = (RawPoint->X * pContext->CoeffD) + (RawPoint->Y * pContext->CoeffE) + pContext->CoeffF;
During EvtDevicePrepareHardware or EvtDeviceD0Entry , read:
Pseudo-code:
void EvtIoDeviceControl( WDFQUEUE Queue, WDFREQUEST Request, size_t OutputBufferLength, size_t InputBufferLength, ULONG IoControlCode)
For engineers developing touch solutions over the I2C (Inter-Integrated Circuit) bus, the challenge is twofold. First, the device must conform to Windows' HID (Human Interface Device) standards. Second, it must account for physical variances in the touch sensor, display lamination, and environmental drift. The most robust solution to these challenges is a specifically architected for I2C touch device calibration. kmdf hid minidriver for touch i2c device calibration
WDFKEY hKey; WdfDeviceOpenRegistry(Device, PLUGPLAY_REGKEY_DEVICE, &hKey); // Read REG_BINARY "CalibCoeffs" -> store in device context WdfRegistryClose(hKey); When user-mode sends SET_COEFFS , write back immediately to the registry.
For sealed systems, consider writing coefficients directly to the I2C device's EEPROM. This requires an additional vendor-specific I2C command. Part 6: User-Mode Calibration Application – The Companion Tool Your KMDF driver alone cannot perform calibration; it only applies it. A user-mode application must guide the user, collect points, compute coefficients, and call DeviceIoControl . The most robust solution to these challenges is
NTSTATUS DeviceAdd(WDFDRIVER Driver, PWDFDEVICE_INIT DeviceInit)