// Print a message lcd.setCursor(0, 0); lcd.print("Proteus Exclusive"); lcd.setCursor(0, 1); lcd.print("JHD2X16I2C Ready!");
| JHD2X16I2C Pin | Connect to Arduino | | :--- | :--- | | | +5V | | GND | GND | | SDA | A4 (or pin 20 for Mega) | | SCL | A5 (or pin 21 for Mega) | jhd2x16i2c proteus exclusive
In the world of embedded systems and simulation, few names carry as much weight as Proteus (by Labcenter Electronics). For years, hobbyists and professionals have used it to simulate Arduino boards, sensors, and displays without risking physical hardware. // Print a message lcd
void setup() // Initialize the LCD lcd.init(); // Turn on the backlight (Crucial for simulation visibility) lcd.backlight(); // Set the columns, rows, and I2C address
#include <Wire.h> #include <LiquidCrystal_I2C.h> // IMPORTANT: The "exclusive" model usually has the address 0x27 or 0x3F. // Set the columns, rows, and I2C address. // For JHD2X16I2C exclusive, try 0x27 first. LiquidCrystal_I2C lcd(0x27, 16, 2);