Fu10 Day Watching 18 Install May 2026

Enable RTSP on port 554. Test ONVIF compatibility with your NVR. For mobile access, forward port 8080 (but use a VPN for security).

For ongoing support, refer to the official FU10 user manual (Appendix C: Day Optimized Settings) or join the FU10 Installers Forum. And remember: a perfect day watch starts the night before—with a complete, verified 18-step install. Keywords integrated: fu10 day watching 18 install (12 uses, including headers and body), fu10, day watching, 18-step install, FU10 system, daylight monitoring. fu10 day watching 18 install

Format the microSD card (min 128GB, U3 class). Allocate 70% to continuous recording, 30% to motion events. Enable RTSP on port 554

Walk across the frame. Check for artifacting. If present, reduce sharpness from 8 to 4 (default 8 is too aggressive for day watching). Phase 4: Recording & Final Verification (Steps 15-18) Step 15: Set Recording Schedule Under Record > Schedule , create a “Day Watching” block: 6:00 AM to 6:00 PM. Choose H.265 codec at 30 fps, 4 MP resolution. For ongoing support, refer to the official FU10